热门搜索关键词:

您现在的位置:首页 > 新闻资讯 > 行业新闻

纸盒包装压痕精准才上档次!

时期:2019-08-27 13:29:08 点击数:
随着社会的发展和人民生活水平的不断提高,消费者在购买商品时,除了对商品的内在质量,对商品的包装也提出了更高的要求。这不仅包括包装设计的要求,还包括印刷后包装加工的质量要求。局部压实印刷材料,产生痕迹,使其具有一定程度的凹凸空间称为压痕。
  With the development of society and the continuous improvement of people's living standards, when consumers purchase commodities, in addition to the intrinsic quality of commodities, the packaging of commodities also puts forward higher requirements. This includes not only the requirements of packaging design, but also the quality requirements of packaging processing after printing. Local compaction of printed materials produces traces that give them a certain degree of concave and convex space called indentation.
  压痕加工技术,最初只用于纸盒包装成型,后来逐渐应用于各种印刷品的表面加工,尤其是高档纸盒、纸箱、商标、工艺品等表面的精加工。现在,缩进技术已实现包装设计的重要手段之一,不仅最终质量和包装中发挥着重要作用的影响,并在很大程度上提高印刷品的艺术效果,使印刷品新的功能,已成为一个重要的增值和促销手段的印刷品。
  Initially, indentation technology was only used for carton packaging, but later it was gradually applied to the surface processing of various printed products, especially high-grade cartons, cartons, trademarks, crafts and other surface finishing. Now, indentation technology has become one of the important means of packaging design. It not only plays an important role in the final quality and packaging, but also greatly improves the artistic effect of printed matter and makes the new function of printed matter become an important means of value-added and promotion.
  压痕线是利用钢丝通过压痕在承印物上压痕的过程,给弯曲槽留下良好的印痕。压痕线不规则的主要原因是钢线垫纸压痕槽左太宽,压痕板的位置不固定;钢丝垫纸厚度不足,坡口角度不规范,出现多余的圆角;刀排、固定刀紧度不合适,钢钱太紧,底部不能达到与压盘平整表面接触,压痕时易扭;钢钱太松,压痕时容易移动。消除方法是更换钢丝垫纸,压痕槽宽度适当;增加钢丝垫纸厚度,修剪坡口角度;调整模板位置;排刀用手实刀多次,以感觉其紧度适宜为准。
  The indentation line is a process of indentation of steel wire through indentation on the substrate, leaving a good impression on the bending groove. The main reasons for irregular indentation line are that the left of indentation groove of steel wire pad is too wide and the position of indentation plate is not fixed; the thickness of steel wire pad is insufficient, the groove angle is not standardized, and there are redundant rounded corners; the tightness of knife row and fixed knife is inappropriate, the steel money is too tight, the bottom can not reach the flat surface of the indentation plate, and the steel money is easy to twist when indentation is too loose; The indentation is easy to move. The elimination method is to replace the steel wire pad with appropriate width of indentation groove, increase the thickness of the steel wire pad and trim the groove angle, adjust the position of the template, and use hand knife for many times to feel the appropriate tightness.
  有些产品要求压痕面积大,工艺要求会变成压花。有的产品印后压痕,有的印后压痕;有些在印刷覆膜压痕时,有多种方法趋向多样化。凹凸和压痕往往同时完成。模切压痕技术在卷烟标志包装成型中也起着非常重要的作用,因为它直接关系到卷烟标志包装的质量,能够满足卷烟厂卷烟机的要求。超大量的生产包装盒子,如香烟和酒标签通常是大规模生产,重复生产,确保产品质量的前提下,凹凸、模切压痕技术相结合来完成的生产香烟标签,不仅为公司节省机械和设备投资,而且可以极大地提高生产效率。压痕技术应用更为广泛。厚纸折叠、请柬、门票、贺卡、彩色激光打印、厚介质喷墨打印、优惠券、门票、收据等传统应用较为深入,同时在酒盒、广告、折叠名片等新领域广泛涉足。
  Some products require large indentation area and process requirements will become embossing. Some products have post-press indentation, some have post-press indentation, and some have diversified methods when printing film indentation. The concave-convex and indentation are often completed at the same time. Die-cutting indentation technology also plays a very important role in cigarette label packaging, because it directly affects the quality of cigarette label packaging, and can meet the requirements of cigarette machine in cigarette factory. Ultra-large-scale production of packaging boxes, such as cigarette and wine labels, is usually mass production, repetitive production, to ensure product quality, under the premise of concave-convex, die-cutting indentation technology to complete the production of cigarette labels, not only for the company to save machinery and equipment investment, but also can greatly improve production efficiency. The indentation technology is more widely used. Thick paper folding, invitation cards, tickets, greeting cards, color laser printing, ink-jet printing, coupons, tickets, receipts and other traditional applications are more in-depth, while in wine boxes, advertising, folding business cards and other new areas are widely involved.
  一般来说,在包装的过程中,我们需要的产品是适合消费者的需求和习惯。总之,生活水平的改善需要我们包装纸箱的质量不仅硬度、压缩和其他技术合格的水平,而且在美丽的观赏水平,还需要我们的压痕技术继续超越,为人民提供更多更好的产品,这是我们传统的一个想法。
  Generally speaking, in the process of packaging, we need products that are suitable for consumers'needs and habits. In short, the improvement of living standards requires that the quality of our cartons not only be at the level of hardness, compression and other technical qualifications, but also at the beautiful ornamental level. It also requires that our indentation technology continue to surpass and provide more and better products for the people. This is our traditional idea.